Tea Party Baby Shower

Happy Friday everyone! Don’t you just love that Friday feeling when you know you have two whole days of relaxing ahead of you? To wrap up my week I’m finally getting around to sharing the “Tea Party” baby shower I hosted a few weeks ago for my (still very pregnant!) BFF. Everything was hand-made and DIY’ed for the special day. You can see the step-by-step invites, favors, welcome sign, and games and cards I made here. It was so much fun planning it and I think it went great so I’ll just let the pictures I snapped do the talking for me. Enjoy!

 

 





    

So what did you all think? Have you ever hosted or been to a shower that was full of awesome ideas or fun decor? Please feel free to share any stories or ideas you have!

      

 

    

(All photos property of Reckless Bliss)

DIY Baby Shower Favors

Well my pretties, yesterday I threw a shower for my enormously pregnant friend and now that she’s seen everything up my sleeve for the special day I can share it here on Reckless Bliss with  you good folks -including the card I got her which you can see above. Normally I’d get my craft on and make a homemade card but this one was too fun to pass up. (You can also check out a previous post I did on some DIY tea party themed invites here).

I’m going to be sharing a lot of the various things I made and eventually showing you the actual shower itself but let’s pace ourselves shall we? Today I want to share the French lavender soap favors I made for each guest to take home. It was super simple but turned out quite cute in the end.

 

I started out with some sweet little wicker baskets I found at a soap store for $0.88 each. Sold.

To make it look more like a nesty and cute I filled it with some run of the mill shredded tissue paper you can find at any dollar or craft store.

  Each soap bar got wrapped in brown wrapping paper which I also bought from a dollar store.

I attached a clear piece of doubled sided tape in the center of the front of the soap.

    

I then wrapped a thin piece of ribbon cut to length around the soap and stuck it to the tape.

For the next step I laid another piece of doubled sided tape (amazing invention by the way!)over top of the ribbon on the face of the soap. Be sure that this piece of tape is long enough so it will give a big adhesive surface to hold your label in place.

I used Microsoft Paint and created personalized labels for each bar so when people go to use the soap sometime down the line they’ll remember the special day we all shared. Plus, personalized is always just more fun than generic!

 

After I cut each label down to size using my handing dandy Martha paper cutter I placed the label on top of the newly taped soap face.

  

Then each bar gets to relax in the little basket nest.

   Don’t they look comfy-cozy altogether?

 

Once all the goodies are prepared I wrapped them in a piece of clear cellophane (word of the day: dollar store!) and tied them into little bows with more of the ribbon I used to wrap each bar.

   One tip I would suggest is to tape the cellophane in place once you’ve twisted the top so it holds its shape while your tying your bow on, otherwise it can get pretty frustrating.

I’m a major planner so these beauties were finished for about two months before the actual shower. My home slowly turned into a storage unit for baby shower decor. This is part of the affected area above my T.V. I have to say though, I wasn’t hating how girly and tea party-like my place was becoming.

     

So that was my favors, pretty simple stuff. The bulk of time consumption comes from all the wrapping and assembling but it’s way less expensive then buying some pre-made ones online or from a fancy store. I estimate that each favor only cost me about $2.80 after materials cost.  It doesn’t include my time to make each one but I was on Netflix the whole time while sniffing heavenly lavender soap so I can’t complain. Check back soon for some more DIY projects!

 

 (All photos are property of Reckless Bliss)

DIY Wall Art

Happy Tuesday everyone, I hope you are all having a beautiful Autumn filled day. Today I wanted to share a little DIY project that’s been in the works for awhile now ‘round these parts. I have no problems starting fun projects but I’m really bad on that pesky following through part that’s so pivotal to the reveal of said project. Alas, this DIY was finally completed and I’m quite pleased with the outcome.

I was struggling to find the right piece for above my couch after months of looking and buying things only to return them later. I wasn’t satisfied with anything I found and was getting really sick of my plain empty wall so I decided to give up searching, roll up my sleeves and just make what I wanted.

To create this for your home it’s a few steps but they are so easy it’s well worth it. I did this entire project on the cheap too; in total it cost me about $40 start to finish. Here’s how it came together:

 

First thing I needed was supplies of course. We bought an MDF board from the local lumber store for $10.

  We bought a rubber mat commonly used on the outside of your door for $10.

  And we bought some spray in the colors we wanted to do our stencilled artwork in. We went with a chocolate brown and bright white but any color combo would work if you wanted to customize it to your home’s color palette.

    After we measured out three boards to the size of the rubber mat we gave each one two coats of the brown spray paint as the base color.

  It takes about 20 minutes for the spray paint to fully dry (or at least ours did, check your bottles at home) I suggest propping them up on scrap pieces of wood so the wet sides never come into contact with anything. Any time you see a piece of MDF laying flat we have it propped up to avoid mucking up the sides.

  

When it’s all dry it should look like this. Not very exciting, just your average piece of brown MDF.

We used our trash can layered with newspapers as the pedestal for spray painting the pattern which worked like a charm. The sides will need to be taped off to avoid being sprayed with the white paint.

 

Take care to not put the tape too far onto the MDF so it won’t interfere with the stencil.

 

Lay your mat flat and evenly on your MDF. The mat will stay put because it’s pretty hefty and meant to be non-slip so it does the work for you.

   Spray an even layer of white paint on top of the mat and let it dry. Then repeat the process.

   Take extra special care to get into all the teeny crevices and holes with the white paint to be sure they show up when the mat is lifted.

Let all the white paint dry completely before you touch the mat because if you need to add some of smudge it then you’re in trouble. These types of things never go back in the exact spots they started from.

  The funnest part is the reveal! Peel the mat back slowly and put on your wow face.

Oh-la-la!

   Repeat these steps as many times as you like depending on the number of pieces of artwork you want. We went with three but it can be done hundreds of times if you like….. and have the wall space.

   You can leave it as is and have a really defined stencil look. We went the other way and sanded the pieces to have a rustic weathered look. This also really helps to blur the little imperfections bound to happen.

  Here’s a closer look at what sanding it down looks. Be careful not to overdo it or you will start to lose the pattern which sort of defeats the whole purpose.

   This is a shot of the completed MDF post sanding.

    To seal the paint and give the boards a more finished look we topped them off a coat of clear finish Varathane in satin.

  Doing this makes the boards look a bit more professional and it will also make them much easier to clean.

         Now for the hanging process. Since this was just a piece of MDF we had to come up with our own way to hang the boards.  We went with some scrap pieces of wood to give the boards some definition from the wall. The biggest piece got a hole cut into it for the little teeth hanger to go across. To attach the the pieces of wood we used wood glue and screws.

   Here’s a close up of the pieces of wood we used. The little guy is for the bottom of the boards so it hangs evenly from the wall.

 

Pretty straight forward stuff once you’ve got your pieces cut. We attach the teeth hanger and added some cushioned wall protectors so it would sit softly against the wall.

 

The little pieces were screwed in and also got the cushion treatment

This is how the finished board looks with all the attachments.

 

And now for the best part, which is sitting back and enjoying the fruits of your labor!

You can get a sense of the definition from the wall that we attempted by using the small wooden pieces here which went well with our raised trim work below.

   And there you have it my pretties. I hope you found this tutorial entertaining and useful. Please feel free to share your thoughts or DIY ideas you’ve used in your home too!

-Toodles!

(Photo credits property of Reckless Bliss